4.3 Onboarding and Probation

Onboarding is not a welcome party or a corporate orientation; it is the Calibration of a new component into the operating machine. In a high-precision manufacturing and engineering environment, a misaligned new hire actively causes friction, expensive rework, and significant safety risks.

The overarching purpose of onboarding is to minimize Time to Value (TTV). Our orientation framework is the systematic process of converting a “Net Cost” (a new hire consuming payroll without producing output) into a “Net Asset” (a highly productive employee). This process is highly structured, mandatory, and graded.

The 30-60-90 Day Curriculum

We reject the “sink or swim” management philosophy. Every single new hire must methodically progress through three distinct, measurable phases of certification. Failure to meet the hard output requirements of any phase triggers a formal probation review.

Phase 1: The Download (Days 1–30)

Objective: Compliance, Physical Safety, and Baseline Cultural Alignment.

Focus: Learning the company Operating System, safety protocols, and core toolsets.
Mandatory Training:
- ESD Control: How to properly handle expensive hardware without destroying it via static discharge (ANSI/ESD S20.20 standard).
- Information Security: Intellectual Property protection and zero-trust data handling.
- Factory Safety: Location of emergency stops, toxic chemical handling protocols, and evacuation routing.
The Output Verification:
- Achieve a 100% pass score on the Safety & ESD Exam. This is a requirement.
- Complete 100% of the designated reading modules in the Employee Handbook.
- Required Shadowing: Directly observe 5 core operations (e.g., SMT changeover, Daily Stand-up, QA Inspection).

Phase 2: The Ramp (Days 31–60)

Objective: Guided, Error-Free Execution.

Focus: Performing real operational tasks under the direct supervision of a designated peer mentor.
Constraint: The employee is allowed to execute work, but a Senior Peer must review 100% of the output before it is committed to the codebase or shipped to a customer.
The Output Verification:
- The First Mission: Execute one small, low-risk project (e.g., “Rewrite the SOP for Test Station 4”).
- Role Certification: Prove functional mastery over the core digital tools (Jira, the ERP system, Altium/SolidWorks).

Phase 3: The Solo (Days 61–90)

Objective: Full, Unsupervised Autonomy.

Focus: Independent, confident execution of role KPIs and strategic missions.
Constraint: Daily supervision formally reduces to the standard weekly 1:1 cadence.
The Output Verification:
- The KPI Baseline: Achieve “Green” (passing) status on personal standard work metrics for 2 consecutive, unbroken weeks.
- The Probation Defense: Deliver a formal presentation to management detailing: “What I learned, where the system is broken, and exactly what I will build to fix it.”

Safety & Role Certification (The Gatekeepers)

Access to the physical production floor and critical digital infrastructure is a conditional privilege, never an automatic right.

When a new hire fails the ESD or Safety exam, their physical access badge must be deactivated by Security until re-training and re-testing are complete.
When a new hire fails to demonstrate competency in the live ERP system, all write-access is revoked to prevent data corruption.

Factory Certification

For manufacturing and operational roles, simply “reading the manual” is entirely insufficient. The employee must demonstrate physical, tactile competence (e.g., “Show me exactly how you load this specific reel on the Pick & Place machine”). This Practical Test must be formally signed off by the Shift Lead.

The Probation Review (The Final Decision)

The 90-day Probation period is our final quality control gate. It is not a rubber-stamp formality. The default answer for any borderline candidate is Immediate Exit.

Timing: Day 85 (Exactly one week before the 90-day mark).
Required Attendees: The Hiring Manager + HR + The Bar Raiser.

The Decision Logic:

Pass: The candidate met all 30-60-90 outputs and adhered deeply to corporate values. -> Action: Convert to Permanent Status.
Extend: The candidate possesses massive potential but missed specific targets due to verified external blockers (e.g., equipment delay). -> Action: Extend Probation by exactly 30 days (Allowed ONE time maximum) with a highly specific Performance Improvement Plan (PIP).
Exit: The candidate failed to hit the hard outputs or demonstrated any cultural misalignment. -> Action: Immediate Termination.

Executive Note: It is much cheaper and less painful to admit a hiring mistake at Day 90 than to suffer the compounding damage of hiring a mediocre employee for 5 years. Use this gate effectively.

Manager Duties vs. HR Duties

Managers: Do not outsource your onboarding to HR. HR merely provides the logistics; you, the Manager, must provide the operational context and leadership.

The Manager’s Duty:

Day 1 Readiness: Have the physical desk, the provisioned laptop, and all software access rights 100% ready. (Nothing breaks trust faster than a missing laptop on day one).
The Plan: Write and finalize the 30-60-90 objectives before the employee’s start date.
The Mentor: Assign a highly competent “Cultural Peer” to answer the tactical questions the new hire is too afraid to ask the boss.

HR’s Duty:

Logistics: Execute the Contract, Payroll integration, Badge printing, and equipment distribution.
Training: Administer the Learning Management System modules.
Audit: Ensure the Probation Review happens on the calendar on time.

Standard Onboarding Checklists

Checklist A: Factory / Operations Roles

Step	Action Item	Owner	Timeframe
01	ESD & Safety Training (100% Exam Pass Required).	QA Lead	Day 1
02	Issue mandatory PPE (Smock, Heel Straps, Safety Glasses).	Admin	Day 1
03	Assign Locker and configure specific Badge Access Level.	HR	Day 1
04	Machine Equipment Certification (Practical Physical Test).	Shift Lead	Day 14
05	MES / ERP Login Creation & Module Training.	IT	Day 7
06	Shift Handover Protocol Training.	Manager	Day 30

Checklist B: Office / Engineering Roles

Step	Action Item	Owner	Timeframe
01	InfoSec & IP Protection Training (Exam Pass Required).	IT	Day 1
02	Software License Provisioning (Altium, SolidWorks, Jira).	IT	Day 1
03	Operating System Handbook Deep Dive (Reading & Quiz).	HR	Week 1
04	”The Gemba Walk” (Mandatory Factory Tour & Process Overview).	Manager	Week 2
05	First Mission Assigned (The 30-Day Goal).	Manager	Week 1
06	High-Priority Stakeholder Introduction Meetings.	Mentor	Week 2

Final Baseline Checklist

The Control Point	The Requirement
The Safety Gate	No physical badge access without passing the Safety/ESD exam.
Plan Readiness	30-60-90 goals must be documented and approved before Day 1.
Access Rights	Write-access to the ERP or Codebase only after functional Role Certification.
Probation Review	Mandatory, unskippable meeting on Day 85.
Documentation	Signed, completed Onboarding Checklist filed permanently in the HRIS.
The Outcome	Probation is Pass or Fail. Extension is an extremely rare exception.